SAPPHIRE AND RUBY ORIFICE FITTINGS AND CONNECTORS
Bird Precision offers a wide variety of standard options in orifice hardware. Bird Precision orifices are swagged in place by a proprietary method for maximum strength and sealing, and most are available with micro screen filtration. Bird also retrofits customer supplied fittings and currently retrofits many common commercially available fittings. Sapphire and ruby orifices are laser drilled and wire lapped, resulting in a burr-free orifice that is extremely round and sharp-edged. Bird Precision’s synthetic sapphire and ruby orifices feature zero porosity, high-temperature tolerance and wear resistance as well as chemical resistance. Repeatable flows from less than .5 cc/min. All fittings and connectors are offered in sizes from .00029″ through .081″.
Please contact a knowledgeable Bird Sales Representative at (800) 454-7369 with any questions you might have or to
inquire about having Bird Precision design a custom fitting to your specifications.
Brass Fittings and Connectors
Brass fittings and connectors are available for brass tubing or threaded tube connectors such as typical 1/8″ NPT male to male,
male to female, elbows, Y’s, T’s and unions. Brass is recommended where stainless steel is not warranted, but pressure or application dictates. Most are available with either a straight hole insert or “vee” orifice insert. Sizes range from .00029″ through .081″.
|82029||Face Seal 10-32 THD 1/4″ HEX, Buna or Nylon Washer|
|82416||Male Hex Nipple, 1/8″ Pipe to 1/8″ Pipe|
|82184||Male Elbow 90 degrees, 1/8″ Pipe Thread, 1/8″ Tube Size, quick connect|
|82703||Male Run Tee for 1/4″ Tube|
|82802||Barb in Tube Insert for 1/16″ ID, flexible|
|82618||Barb in Tube Insert for 1/16″ ID, flexible to terminate|
|82717||Adapter 1/8-27″ NPT Male to 1/8-27″ NPT Female|
|82704||3-56 thread to 1/16″ Barb Miniature|
|82478||10-32 thread to 1/8″ Barb Buna Washer Seal|
|82666||10-32 thread to 1/16″ Barb Buna Washer Seal|
|82271||10-32 thread to 1/8″ Barb O’Ring Seal|
|82385||In-Line Brass Tube Fitting for 1/16″ ID Flexible Tubing|
|The above fittings are available with our complete line of orifices from .00029″ through .081″ with or without stainless steel filters.|